loader module loaded
kernel=/boot/vmlinux.bin
cmdline=root=/dev/hda1
magic: 4b4f4b4f
---cmdline=root=/dev/hda1 console=uart,mmio,0x80004600,57600n8
Linux version 2.6.15-kurobox (hiroyuki@kuro) (gcc version 3.3.5 (Debian 1:3.3.5-
13)) #1 Fri Feb 17 14:06:26 JST 2006
BUFFALO Network Attached Storage Series
(C) 2002-2005 BUFFALO INC.
Built 1 zonelists
Kernel command line: root=/dev/hda1 console=uart,mmio,0x80004600,57600n8
OpenPIC Version 1.2 (1 CPUs and 11 IRQ sources) at 80040000
PID hash table entries: 512 (order: 9, 8192 bytes)
decrementer frequency = 32.522240 MHz 
Console: colour dummy device 80x25
Early serial console at MMIO 0x80004600 (options '57600n8')
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 62372k available (1732k kernel code, 652k data, 92k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 1 of device 0000:00:00.0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
I2C: rs5c372 RTC driver successfully loaded
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x80004600 (irq = 26) is a 16550A
serial8250.1: ttyS1 at MMIO 0x80004500 (irq = 25) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SiI680: IDE controller at PCI slot 0000:00:0c.0
SiI680: chipset revision 2
siimage: IDE controller MMIO ports not available.
SiI680: BASE CLOCK == 100
SiI680: 100% native mode on irq 17
    ide0: BM-DMA at 0xbffed0-0xbffed7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbffed8-0xbffedf, BIOS settings: hdc:pio, hdd:pio
hda: HDS722516VLAT20, ATA DISK drive
ide0 at 0xbffef8-0xbffeff,0xbffef6 on irq 17
hda: max request size: 64KiB
hda: 321672960 sectors (164696 MB) w/1794KiB Cache, CHS=20023/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
physmap flash device: 400000 at ffc00000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition definition
Creating 5 MTD partitions on "phys_mapped_flash":
0x00000000-0x00400000 : "mtd_allflash"
0x00000000-0x00300000 : "mtd_firmimg"
0x00300000-0x00370000 : "mtd_bootcode"
0x00370000-0x00380000 : "mtd_status"
0x00380000-0x00400000 : "mtd_conf"
usbmon: debugfs is not available
ehci_hcd 0000:00:0e.2: EHCI Host Controller
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.2: irq 19, io mem 0xbfffcf00
ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd 0000:00:0e.0: OHCI Host Controller
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: irq 19, io mem 0xbfffe000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:0e.1: OHCI Host Controller
ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0e.1: irq 19, io mem 0xbfffd000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Adding console on ttyS0 at MMIO 0x80004600 (options '57600n8')
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 92k init
INIT: version 2.86 booting
Activating swap.
Adding 257032k swap on /dev/hda2.  Priority:-1 extents:1 across:257032k
EXT3 FS on hda1, internal journal
System time was Fri Feb 17 14:01:43 UTC 2006.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Fri Feb 17 14:01:44 UTC 2006.
Cleaning up ifupdown...done.
Regulating system clock...adjtimex: Invalid argument
for this kernel:
   USER_HZ = 100 (nominally 100 ticks per second)
   9000 <= tick <= 11000
   -33554432 <= frequency <= 33554432
done.
Calculating module dependencies... done.
Loading modules...
All modules loaded.
Checking all file systems...
fsck 1.37 (21-Mar-2005)
Setting kernel variables ...
... done.
Mounting local filesystems...
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/hda3 on /mnt type ext3 (rw,noatime)
Cleaning /tmp /var/run /var/lock.
Setting up networking...done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
eth0: ERROR while getting interface flags: No such device
eth0: ERROR while getting interface flags: No such device
Failed to bring up eth0.
done.
Starting portmap daemon: portmap.

Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Fri Feb 17 23:01:49 JST 2006

Running ntpdate to synchronize clockError : Temporary failure in name resolution
.
Initializing random number generator...done.
Recovering nvi editor sessions... done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting portmap daemon: portmap.
Starting internet superserver: inetd.
Starting KURO-BOX event daemon: kuroevtd.
Starting Samba daemons: nmbd smbd.
Starting NFS servers: nfsd mountd.
ProFTPd is started from inetd/xinetd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Starting web server: apache.

Debian GNU/Linux 3.1 kuro ttyS0

kuro login: root
Password: 
Last login: Fri Feb 17 22:59:19 2006 on ttyS0
Linux kuro 2.6.15-kurobox #1 Fri Feb 17 14:06:26 JST 2006 ppc GNU/Linux

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
You have mail.
kuro:~#