Starting rc : /etc/rc3.d/S90kuro_load start
Warning: kernel-module version mismatch
        loader.o was compiled for  version 2.4.17_kuro-box
        while this kernel is version 2.4.17_mvl21
Warning: loading /boot/loader.o will taint the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules

loader module loaded
/boot/kernel=/boot/vmlinux.bin
initrd=/boot/initrd.gz
kernelcmdline=root=/dev/hda1 revclock=1 console=uart,mmio,0x80004600,57600n8
KERNELBASE=c0000000 r6=a65d70 r7=a65dae
initrdBASE=c0000000 r4=800000 r5=967611
cmd_line=root=/dev/hda1 revclock=1 console=uart,mmio,0x80004600,57600n8
magic: 82410000
---cmdline=root=/dev/hda1 revclock=1 console=uart,mmio,0x80004600,57600n8
Linux version 2.6.17-rc2-kuroboxHG (hiroyuki@kuro-hg) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #4 Fri Apr 21 22:39:29 JST 2006
Early serial console at MMIO 0x80004600 (options '57600n8')
BUFFALO Network Attached Storage Series
(C) 2002-2005 BUFFALO INC.
Built 1 zonelists
Kernel command line: root=/dev/hda1 revclock=1 console=uart,mmio,0x80004600,57600n8
OpenPIC Version 1.2 (1 CPUs and 11 IRQ sources) at 80040000
PID hash table entries: 1024 (order: 10, 4096 bytes)
decrementer frequency = 32.522240 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 125652k available (1808k kernel code, 792k data, 108k init, 0k highmem)
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1437k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 1 of device 0000:00:00.0
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
I2C: rs5c372 RTC driver successfully loaded
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x80004600 (irq = 26) is a 16550A
serial8250.1: ttyS1 at MMIO 0x80004500 (irq = 25) is a 16550A
RAMDISK driver initialized: 2 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
r8169 Gigabit Ethernet driver 2.2LK loaded
eth0: RTL8169 at 0xc9000f00, 00:07:40:ce:a9:47, IRQ 16
eth0: 100Mbps Full-duplex operation.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SiI680: IDE controller at PCI slot 0000:00:0c.0
SiI680: chipset revision 2
siimage: IDE controller MMIO ports not available.
SiI680: BASE CLOCK == 100
SiI680: 100% native mode on irq 17
    ide0: BM-DMA at 0xbffed0-0xbffed7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbffed8-0xbffedf, BIOS settings: hdc:pio, hdd:pio






flag address=fff70100:ffffffff
call set_image(ffc00000, 0)

******* Product Information *******
----------------------------------
Product Name: KURO-BOX/HG(IESHIGE)
          VER: 1.00
         Date: 2004/10/19 17:18:54
----------------------------------
Firmware check: OK.
zimage_start=FFC0006C, zimage_size=000C2F72

Linux/PPC load: root=/dev/hda1